INGERSOLL - DRESSER model 65 - 40 CPX250 Pumps Centrifugal Mild Steel / Cast Iron. 65mm INLET / 40mm outlet. Driven by a 22kW 2930-rpm 415/3/50 motor. Packed gland seal. Rated for 40 cubic meters per hour at 89m head at 2940 rpm. Mounted on a cast iron base plate.
Number available: 2
Ingersoll – Dresser ME500 – 500 Horizontal Pumps Centrifugal Mild Steel / Cast Iron. 500mm Flanged inlet and outlet Cast iron body with stainless steel impeller
Flow rate and Head: 2163 cubic meters per hour @ 6.5m and 990 rpm Mechanical Seal Drive and Coupling: 75kW 380 / 415/3/50 975 rpm TEFC motor long coupled with coupling guard. Foot mounted support on common base plate
Operating pressure: 4 bar maximum at 20 Celsius
SPP KM08D Pumps Horizontal Centrifugal Mild Steel / Cast Iron., Flanged Inlet and Outlet Connections size 100 mm inlet / 75 mm outlet Mechanical Seal Drive and Coupling: 37kW 2950-rpm 400/3/50 close coupled motor. "Monobloc" construction
Supports: Footplate on motor and casing
UNUSED
Number available: 1
APV Stainless Steel Pumps Centrifugal Mild Steel / Cast Iron. Horizontal Canned Motor
Inlet and Outlet size: 2"(50mm) Inlet / 1"(25mm) Outlet Inlet and Outlet Connections: Flanged Type: 3CCVF 15D121T25
Model Number: EEXD2BT6
Mechanical Seal
Drive and Coupling: 11kw 415/3/50. Bare shaft
Full length base plate. Manufactured 1996
Operating temperature 20C
INGERSOLL - DRESSER Horizontal Pumps Centrifugal Mild Steel / Cast Iron. Ductile Iron / Duplex Stainless steel. Flanged Inlet and Outlet size: 200mm inlet / 150mm outlet
Type: 200 - 150 CPX250 Flow rate and Head: 210 cubic meters per hour at 6.1m head
Drive and Coupling: Bare Shaft
Manufactured 1997
INGERSOLL - DRESSER Horizontal Pumps Centrifugal Cast Iron./ Duplex Stainless Steel
Flanged Inlet and Outlet size: 200mm inlet / 150mm outlet
Type: 200 - 150 CPX250
Flow rate and Head: 167 cubic meters per hour at 6m head
